Which folding lateral arm retractable awning model is right for me?

That depends on your needs, what type of weather you plan to have the awning extended or partially extended in, where you would like to install the retractable awning, how you plan to use it, the size you need or want (the area you want to cover), and your budget.

Can I use or leave my folding lateral arm awning extended during the rain or during the snow season?

All lateral arm awning models from SBF INTERIORS AND OUTDOOR SOLUTIONS LIMITED or any other vendor can be used for light rain but not for heavy rain assuming water repellent fabric is being used. Heavy rainfall is considered more than .30” (7.6mm) per hour, per the American Meteorological Society. Water from light rain will run off as long as there is enough pitch (angle/slope) placed on the arms/fabric. Should you need a product for heavy rain, high wind, hail protection, or snow load please consider one of our retractable patio and deck pergola cover systems designed for these types of weather.

Can I install your folding lateral arm awnings on vinyl or aluminum siding, stucco, or on masonry or to the side of my RV or mobile home?

All models offered by SBF INTERIORS AND OUTDOOR SOLUTIONS LIMITED can easily be installed onto any of the above. It is extremely important to use the correct type and size of fastener depending on what substrate the awning will be installed to. SBF INTERIORS AND OUTDOOR SOLUTIONS LIMITED provides everything needed for the retractable awning and installation except for the fasteners. The decision on fastener type and size used is to be made locally based on the substrate the awning is being installed onto along with building code requirements (if any).

Can I mount the SBF lateral folding arm awnings to my wall OR soffit / eave / overhang OR roof OR side of the rafter OR to a beam?

All models offered by SBF INTERIORS AND OUTDOOR SOLUTIONS can be attached to a wall, soffit / eave / overhang, roof, and side of a rafter, fascia, or beam. We have non-rusting (non-corroding) aluminum brackets for all of the above mounting options.